Primary tabs
Electrolytic Degreaser for Non Ferrous Metal
SKU::RXSOL-68-6832-025
electrolytic degreaser specially designed to remove various types of gummy oils soils pressed lubricants grease etc. from ferrous and non ferrous metal surfaces.
RXSOL Electrolytic Degreaser for Non Ferrous Metal is a fast acting alkaline immersion cum electrolytic degreaser specially designed to remove various types of gummy oils soils pressed lubricants grease etc. from ferrous and non ferrous metal surfaces. Electro-cleaning compound designed to remove oils, greases, polishing compounds, carbonaceous soil, shop dirt, and light residues from ferrous and non-ferrous metal surfaces prior to electroplating, anodizing, phosphating, painting, powder coating, and conversion coatings.
It is formulated with alkaline builders, detergency & anti-redeposition and includes wetting agents, chelants, defoamers, and corrosion inhibitors.
RXSOL Electrolytic Degreaser Advanced alkaline immersion cum electrolytic degreaser. Electrolytic Degreaser Versatile immersion degreaser for ferrous & non-ferrous metal.
Add 5 to 10 percent powder in Water to get OPTIMUM RESULTS
For Example :::
Add 50 to 100 gram per Ltr
Add 5 to 10 Kg RXSOL Electrolytic Degreaser Powder for 100 Ltr water
Add 50 – 80 Kg RXSOL Electrolytic Degreaser Powder per 1000 L. water volume.
Tank and heaters should be constructed with mild steel. M.S. tank with heating arrangement. Mechanical agitation or air agitation may be required. For electrolytic degreasing M.S. sheet may be used for Cathode.
Optimal conditions for using Electrolytic Degreaser
| Parameter | Range | Optimal |
|---|---|---|
| Voltage (V) | 4 – 8 | 6 |
| Working temperature (°C) | 20 – 40 | 25 |
| Exposure time (sec) | 30 – 120 | 60 |
- Appearance: White powder
- Odour: Mild / characteristic
- pH (1% solution @ 25°C): typically 12.5 – 13.5
- Solubility: Soluble in water (warm water accelerates miscibility)
- Electrolytic action accelerates soil lift and improves cleaning consistency
- High alkalinity for rapid emulsification and saponification of oils
- Detergent additives boosts detergency, disperses soils, reduces redeposition
- Can be operated as anodic, cathodic, or reverse-current (best performance)
- Suitable for spray, soak, or electrolytic tank (preferred: electrolytic)
- Breaks the bond between oil/grease and the metal surface
- Disperses and suspends loosened soils in the bath
- Prevents re-deposition of oil back onto parts
- Increases etching risk on aluminium, zinc, and copper alloys
- Raises safety and handling risk
- Can destabilize surfactants
- High pH support (alkaline buffering)
- Gentler alkalinity curve than NaOH
- More process stability over time
- Reduces flash rusting after rinsing
- Protects parts during short dwell times between cleaning and plating/coating
- Stabilizes the surface for better downstream adhesion
- Increases solution conductivity
- Promotes uniform current distribution
- Helps generate more consistent gas evolution (H₂/O₂ bubbles) across complex geometries
BEST BEFORE USE: 2 year from month of manufacturing.
RXSOL Electrolytic Degreaser Powder is alkaline in nature. Aprons, gloves, goggles and boots should be used while handling these products. Splashed on the skin should be washed-off with water. In case of splashing into the eyes, flush it out with water and obtain medical attention.
DISPOSAL : The waste is strongly alkaline and may be neutralised in the effluent treatment plant by using derusting or pickling waste or by mineral acids. After neutralising, the supernatant liquid may be discharged while the sludge may be dumped under ground.
Electrolytic Degreaser Powder manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Vizag, INDIA. Get Electrolytic Degreaser Powder in Dubai, Sharjah, Ras Al Khaimah, UAE. Electrolytic Degreaser Powder manufacturer supplier in Muscat, Sohar, Salalah, Ruwi, Oman.
